Wireless I/O Module 2DI 2DO 2km ON-OFF wireless control 433MHz wireless RTU remote control wireless PLC LS-RDIO0202 manufacturer from China Shenzhen Qianhai Lensen Technology Co., Ltd

Wireless I/O Module 2DI 2DO 2km ON-OFF wireless control 433MHz wireless RTU remote control wireless PLC

Price:	55.0 USD
Payment Terms:	T/T,WU,Paypal
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: LS-RDIO0202

Production Capacity: 5000pcs/month

Delivery Date: 2-6days

Input: 2 digital input

control distance: 1km

application: pump control

Means of Transport: Air

Packing: standard

Brand Name: Lensen

Output: 2 relay output

Frequency: 433MHz

use for: tank level monitoring

1W wireless I/O module,
2 isolated digital inputs, 2 isolated relay outputs
pump on-off wireless controller
433MHz, no communication fee, 2km

Introduction

LS-RDIO0202 Modbus RTU is a 1W I/O module, 2 isolated digital inputs, 2 isolated relay outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for pump control, water level monitoring, motor, valve, light ON-OFF control.

Transparent I/O System, no programming required

Not need internet, no third party cell, no monthly fees

You have full control over your own carrier

Real time status feedback from the remote site

Fast installation and easy setup

Parameter:

Input: 2 isolated digital active inputs (passive input customize)

Output: 2 isolated relay passive contact outputs (active output customize), contact max load 5A@220V AC, 5A@30V DC.

Communication: RS485 (wireless RS485customize)

Protocol: Modbus RTU

Collocated with a wireless data module whose transmitting distance is about 2km-3km. The working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm

Receiving current: <50mA; transmitting current: 600mA

Power supply: DC 9V-36V

Dimension: 115mm*90mm*40mm

Application:

Lighting Control Systems

Wireless Pump Control

Wireless Valve Actuation

Conveyor Control

Grain Augers

Engine Control

Tank Level Monitoring

PLC Activation

SCADA

Parameter
Power output:	1W (or 100mW version)
Power supply:	9V-30V (usually choose 24V DC or 12V DC)
Control distance:	3km (or 1km version)
Baud rate:	1200bps
Receiving sensibility:	-123dBm@1200bps, -118dbm(9600bps)
Networking
Networking:	Point to point and point to multipoint
Protocol:	Modbus RTU protocol
Port Description
Input:	2 active inputs (passive customize), isolated
Output:	2 passive relay outputs, isolated contact max load AC250V/5A,DC30V/5A (active outputs 0-5V customize)
Communication port	RS485 (wireless RS485 customize)
Current
Transmit current:	<600mA (or 100mA version)
Receiving current:	<50mA (or 20mA version)
General
Frequency:	433MHz, 400, 450, 470 or other band
Channel No:	16 channels, can change via DIP switch
Physical Properties
Dimension:	115×90×40(mm)
Antenna Connector:	SMA,vehicle antenna with 1.5m cable
Temperature:	-35℃~+75℃( industrial)
Mounting method:	Standard 3.5 inch industrial guild rail